TREBLAB Z2 - Over-Ear Wireless Workout Headphones with Microphone Manual

Also See for Z2:

User manual (17 pages)

Table of Contents

Contents

1 What's in the box
2 Overview
3 SETTING UP YOUR TREBLAB Z2
4 PAIRING
5 MULTIPOINT CONNECTION
6 AUX LINE-IN CONNECTION
7 AUDIO PLAYBACK
8 ANC FUNCTION
9 PHONE CALLS
10 VOICE ASSISTANT ACTIVATION
11 RESET THE MEMORY LIST
12 TROUBLESHOOTING
13 CHARGING AND BATTERY
14 SAFETY RULES
15 RECYCLING
16 SPECIFICATIONS
17 Documents / Resources
- 17.1 References
- 17.2 Download manual

TREBLAB Z2 - Over-Ear Wireless Workout Headphones with Microphone Manual

What's in the box

TREBLAB Z2 headphones
User's manual
Round TREBLAB sticker
Carrying Case
Carabiner
Charging micro USB cable
7.3.5 mm Audio cable with Mic
Insert card

Overview

The over-ear headphones with Bluetooth* 5.0 Aptx^TM and Active Noise Cancellation technology provide superior sound quality and the convenience of hands-free operation.
Overview

Function	Operation
Power On	Press the POWER button for 3 seconds
Power Off	Press the POWER button for 3 seconds
Play/Pause	Press the POWER button
Volume +	Press the Volume + button
Volume -	Press the Volume - button
Next track	Press and hold the Volume + button for 1 second
Previous track	Press and hold the Volume - button for 1 second
Answer a phone call	Press shortly the POWER button during the incoming call
Reject a phone: call	Press and hold the POWER button during the incoming call for 1 second
End a phone call (Hang up)	Press shortly the POWER button during the conversation
Voice assistant activation	Press the POWER button twice
ANC	Switch the ANC tumbler to the ON position

SETTING UP YOUR TREBLAB Z2

Turn ON
Press the POWER button for 3 seconds. You will hear the "Power ON" voice prompt, and the blue LED light will start flashing.

Turn OFF
Press and hold the POWER button for 3 seconds. You will hear a "Power OFF" voice prompt, and the flashing blue LED light Will go off.

PAIRING

Make sure TREBLAB Z2 are charged and the 3.5 mm Audio cable is not plugged in.

Press and hold the POWER button tor 3 seconds. You will hear the "Power ON" voice prompt. Do not release the button until you hear the "Pairing" voice prompt, and the LED will start flashing BLUE indicating that Z2 are in pairing mode.
Activate the Bluetooth option on your smart device and keep it within 3 feet / 1 meter from TREBLAB Z2 while pairing.
Scan/search for available devices in your smart device.
select TREBLAB za from the device list.
If prompted the password, enter "0000".
Once Z2 are successfully paired and connected, you will hear the "Connected" voice prompt, and the LED will start flashing BLUE slowly.

MULTIPOINT CONNECTION

The TREBLAB Z2 headphones have a multipoint connection. It allows two devices to be connected at the same time. While you won't receive the input from both devices at the same timet you'll be able to transition from one device to another seamlessly.
To connect Z2 to the second device:

Switch OFF temporarily the wireless mode on the first device the headphones connected to.
Repeat pairing steps 1-6 and connect the other device.
Turn ON the Bluetooth mode back for the first device and connect Z2 again.

When you turn the earbuds ON, they will try to reconnect with recently connected device/devices. If the reconnection does not happen automatically, the earbuds will try to find the next device in the pairing list. The headphones can save the last a devices.

AUX LINE-IN CONNECTION

You can connect TREBLAB Z2 to compatible devices using the supplied 3.5 mm Audio cable.
Plug one end of the 3.5 mm Audio cable into the AUX LINE - IN port on the right earphone and plug the other end into the AUX jack on your device.

NOTE:
Remote control for the functions NEXT, PREVIOUS, PAUSE and Volume adjustment by using the buttons on earcups is not supported when using the 3.5 mm Audio cable You will need to make all the adjustments using your smart device.
Some smart functions are supported by using the PHONE button on the 3.5 mm Audio cable.
You can turn on iTunes on your notebook by pressing shortly the PHONE button. Press shortly the PHONE button to PLAY or PAUSE the music while iTunes is ON.
You can activate Voice Assistant on your smart device by pressing shortly the PHONE button.
Press shortly the PHONE button to PLAY or PAUSE the music while your smartphone's music player is ON. Press the PHONE button twice to switch to the next track while listening. Press the PHONE button thrice to switch to the previous track while listening.

AUDIO PLAYBACK

Bluetooth mode
To pause and resume the playback when connected wirelessly, press shortly the POWER button.
To adjust the volume, press shortly the Volume* button to turn the volume up and Volume- button to turn the volume down,
To change tracks on Z2, press and hold the Volume + button for 2 seconds to play the next track and press and hold the Volume - button for 2 seconds to play the previous track.

AUX line-in mode
Press shortly the PHONE button located on the 3.5 mm Audio cable to play or pause the music while your music player is ON.

ANC FUNCTION

The TREBLAB Z2 headphones are equipped with Feedback Active Noise Cancellation (ANC) technology.
The headphones seal out background noise and sounds in your environment for an optimal acoustic experience.
To turn ON the ANC function, switch the ANC tumbler on the left earphone to the ON position. The LED indicator located next to the switch will turn RED.

PHONE CALLS

TREBLAB Z2 can be used to make and receive phone calls when connected wirelessly. Audio playback will be paused during the calls.

To answer a call:	Press shortly the POWER button.
To reject a call:	Press and hold the POWER button for 2 seconds.
To end a call:	Press shortly the POWER button.
Multi calls:	Press shortly the POWER button to answer the first call. When the second one is incoming, press the POWER button to pick it up. The first call will enter into the hold on status. Press the POWER button again to switch back and hold on the second call. Hold and press the POWER button to end the current call. Press shortly again to hang up the second one.

VOICE ASSISTANT ACTIVATION

The TREBLAB Z2 headphones support the voice assistant activation command. o use any of the voice assistants (depending on the assistant enabled on your connected smart device) while in the Bluetooth mode, press the POWER button twice. After the sound notification, you can transmit your voice commands using an inbuilt mic.
To activate the voice assistant while using the AUX LINE-IN connection, press and hold the PHONE button on the cable for 1 second.

RESET THE MEMORY LIST

You can reset the Z2 headphones to the factory default settings by cleaning up the pairing list with the last 8 connected to Z2 devices.
Turn OFF the TREBLAB headphones. Press and hold the Volume + and the Volume - buttons at the same time for 5 seconds. The headphones will automatically turn off. The device memory is now returned to the factory settings.

TROUBLESHOOTING

Problem	Solution
Doesn't turn on	Make sure the headphones are charged. Charge up to 4 hours until the battery is fully charged, if necessary. Press and hold the POWER button again for 1 second.
Music is not playing	Make sure the headphones are charged. Make sure the 3.5 mm Audio cable is correctly and firmly connected to the headphones if you are using the AUX mode. Make sure the 3.5 mm Audio cable has been removed from the headphones if you are using the Bluetooth connection. Make sure the volume level is not set to a 0 level on both the headphones and the device. Make sure that the distance between your device and the headphones is less than 30 feet/10 meters. Make sure your smart device's Bluetooth mode is ON and the device is not plugged into any kind of wired connection.
Headphones don't pair with my Bluetooth device	Make sure the 3.5 mm Audio cable is not plugged in. Make sure the headphones are not paired with any other two devices, as it can only pair with two devices at a time. Make sure that the distance between your device and the headphones is less than 30 feet / 10 meters. Make sure your smart device's Bluetooth mode is ON and not plugged into any kind of wired connection.
Headphones are visible on my device, but do not connect	Make sure the headphones are not paired with any other two devices, as it can only pair with two devices at a time. Make sure that the distance between your device and the headphones is less than 30 feet /10 meters. Disconnect the device from your headphones and remove Z2 from your device's pairing list. Reset the headset by cleaning up the memory list. Try to pair again.
I cannot find a for on my wireless driver laptop	Make sure your laptop supports the wireless connection. If it doesn't, you will compatible with your laptop. need an external wireless USB adapter For further details, consult with your laptop manufacturer.
Frequent disconnection and noise	Make sure that the distance between your device and the headphones is less than 30 feet /10 meters. Make signal between your device and Z2. sure that nothing is blocking the Check if the music is paused. Check if the volume level is set on both the Check if the headphones are running out source device and the headphones. of power.

CHARGING AND BATTERY

To charge the headphones, plug the supplied cable into the micro IJSB charging port on the right ear-cup and the other end of the charging cord into a standard IJSB port. The LED light Will turn RED. It takes up to 4 hours to charge Z2 fully, The RED light will turn OFF when the headphones are fully charged.
One full battery charge provides up to 30 hours of playtime at medimum volume and up to 22 hours at medium volume with the ANC activated function, When the battery is running ow, you will hear the "Battery Low" voice prompt.
Be sure to use a 5V DC, 0.5-1A adapter or charger. using a power source with lower power will increase the overall charging time. Unplug Z2 from the charging cable and the cable from the power source when not in use. If left unused, a fully charged battery will lose its charge over time. We recommend charging TREBLAB ze tuy at least twice a month to maintain the sufficient battery life.

SAFETY RULES

Don't disassemble or modify your headphones for any reason. Doing this may cause the headphones to malfunction or become combustible. The damage to your device can void your manufacturerⁱs warranty.
Do not let your device get wet - liquids can cause serious damage. Damage to your device caused by water can void your manufacturers warranty.
Make sure the headset is completely dry before charging,
Avoid exposing TREBLAB Z2 to extreme temperatures (below 370F / 30C or above 1120; / 450C). Extreme temperatures can cause the deformation of the Z2 components, reduce the battery life and the lifespan of your new headset.
Don't put the device's LED lights close to humans' or annals' eyes
Do not use your Z2 during a thunderstorm* Thunderstorms can cause serious malfunction and Increase the risk of electric shock.

RECYCLING

The earphones can be recycled, and they should be in order to keep our planet clean. Where should you bring them?
In the there are a couple of options:

Best Buy has a recycling program. Just take the broken earbuds with you next time you visit a Best Buy store. This link will help you find the best location: https://www.bestbuy.com/site/store-locator/
Check for other possible locations next to you on these websites (just enter your ZIP to find a location):
https://www.ca112recycle.org
https://search.earth911.com
https://recyclenation.com/find

In Canada, please visit the links below:
https://thinkreuse.net
https://www.ca112recycle.ca

In the UK, please visit the links below:
https://www.recycle-more.co.uk/
https://www.recyclenow.com/ocaI-recycling

SPECIFICATIONS

Battery:	Up to 20 hours playtime (100% volume Bluetooth only). Over 30 hours playtime (medium volume Bluetooth only) Up to 12 hours playtime (100% volume Bluetooth and ANC) Up to 22 hours playtime (medium volume Bluetooth and ANC) 620mAh 3.7V, rechargeable Li-lon Input 5V/0.5A
Charging time:	Up to 4 hours
Voice assistant activation:	Supported by the POWER button double press
Bluetooth version:	BT5.0, HFP v1.7, A2DP v1.3, AVRCPV1.5
Audio playback support:	Quaicomm* aptx™, AAC, SBC.
signal Range.	33ft/10m
Frequency response:	20Hz — 20KHz
Charging port:	Micro USB
Dimensions:	203 x 162 x 82mm /6.4 x 3.2 x 8in
Weight:	240g/8.460z/0.53Ib

We truly appreciate that you chose TREBLAB as your trusted brand of wireless ANC headphones. Our team sincerely hopes that you enjoy the great sound and seamless usability that TREBLAB zz provide. we love making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase or have any questions, please let us know by contacting us at http://treblab.com/contact_us. We care about our customers most of all and are always he7e to serve you.

1YEAR WARRANTY
Parts and Labor Warranty.
Please visit www.treblab.com to register YOUR product. Manufactured by Productech