Logitech Z200 - Stereo Speakers Setup Guide

KNOW YOUR PRODUCT

CONNECT THE SPEAKERS

1. Connect the DC power plug to the back of your right speaker and connect your AC adapter to the electrical outlet
   
2. A-Connect to the 3 5 mm audio jack on your source device using the attached 3 5 mm auxiliary input on the right speaker
   
   
   B-You can also connect a device to the auxiliary input port on the front of the right speaker
   
3. (Optional) Connect your headphones to the headphone jack on the front of the right speaker
   
4. Turn the speaker on using the power knob
   

ADJUST THE VOLUME/TONE

1. Increase (or decrease) the volume of speakers by rotating the control knob clockwise (counter-clockwise) on the right speaker
   
2. Scroll the tone control wheel on the side of the right speaker to increase (or decrease) the bass level
   

www.logitech.com/support/Z200