AGPTEK LW31 - Waterproof SmartWatch 1.69"(43mm) for Android and iOS Phones Manual

Please read this [user manual] carefully before use and keep it for future reference. Any problem about this product, please contact us at support@agptek.com.
This user manual takes iOS system as an example to introduce App, so some instructions might vary from Android system.

PRODUCT OVERVIEW

1. Touch Screen
2. Power Button
3. Strap
4. Optical Sensor
5. Charging Point
6. Strap Slot

Note: Long press the power button to turn on/off the watch.

INSTALL WATCH

1. One side of the spring bar should be inserted into the hole of your watch at first.
   
2. Simply slide the pin with your finger.
3. Align the other side of the spring bar to the other hole of your watch.
4. Release the pin and attach the strap.

CHARGING WATCH

Attach the supplied charger to charging points on the back of watch, and insert the other end of the charger into USB wall charger or USB interface of computer.

Note:

1. Before Use, please fully charge the watch first. Charging time: about 2 hrs.
2. To ensure smooth charging, please put the watch face down during charging.

DOWNLOAD APP

1. Scan the QR code (Shown below).
   
2. Find [Settings] > [QR Code] in Watch. Then, tap it & scan the QR Code with phone.
3. Download "OnWear" from "Apple store" or "Google play store" (Android App store).
   
   

Note: Mobile phone must support Android 5.0 or above, iOS 10.0 or above.

BINDING

1. For first use, open App "OnWear", register and login.
2. Follow the instruction of App to start binding watch. Find third icon below, go to [Pair Device], click [Searching], and the smartphone will start searching for available devices for seconds.
3. After a successful search, select and click "LW31-xxx" to complete the connection.
   There are two situations:
   1. iOS: A pairing request will appear, just click "Pair" to connect.
   2. Android: No pairing request, directly connect.

BASIC OPERATION

On main interface, swipe left to enter daily activity analyse; swipe right to enter main menu; swipe up to enter the message list; swipe down to enter shortcut interface.

FUNCTION

IMPORTANT TIP FOR USING OTHER FUNCTIONS

If you have any using problems about other functions, you can find the solution in App (Go to fourth icon below > click [FAQ]). If you still can't find a solution, you can submit your question in [Support & Suggestions], We will deal with it as soon as possible.

SETTINGS

Find its icon by swiping down the main interface, to access its function. A relative list will show: Language, Display, Vibration Intensity, QR Code, Battery, System.

Display

Set Watch Face Switch, Brightness, Screen Time, Raise To Wake.

1. Watch Face Switch.
   1. Watch: 4 Built-in watch face. Tap Watch Face Switch in the main menu or long press the screen on the main interface to enter. Swipe left/right to switch, and tap one of your favorite watch faces to confirm.
   2. App: Find third icon below > click [Dial Store] > [Dial Center], and select your favorite picture as background of the main interface and customize it according to your preference. Your set watch face can be found in [My Dial] quickly.

System

Includes: About, Shutdown, Reset.

1. About. Display the basic information: Bluetooth Name, Mac Address, Firmware Version, UI Version.
2. Shutdown. Turn off the watch.
3. Reset. Reset your watch.

ATTENTIONS

1. DON'T use over 5V/2A power adapter to charge it.
2. This device is an electronic product, not for medical reference, so the detected data is for reference only.
3. Monitoring process: Take a comfortable, restful sitting position and keep your mind easeful. Forbidden to speak. Place the watch is at the same height as your heart (as shown below).
   
4. With IP68 waterproof, sweat proof and rain proof, it can be used directly in daily washing, shower (cold water) and other daily environments.
5. DO NOT use in bath, sauna, hot spring or other environments with corrosive liquid and hot steam, which will lead to product failure.
6. DON'T operate the watch underwater and wear the watch to deep dive.
7. The watch's case is made of metal (Zinc alloy). Those who are allergic to metal should pay more attention before buying the watch. If you have any discomfort after wearing it, please take off it in time and contact us to return.
8. When there is a updating prompt on the APP, it is recommended to upgrade to the latest version for a better experience.
9. Replaceable watchband: 20mm width; Replaceable charger: 2.5mm distance between only 2 charging points.

SPECIFICATIONS