Tascam DM-24 Features Manual page 3

Busses as effect input sources
Busses 1-8 can now be used as input sources for the
internal effects on the
PATCH
nient if all aux sends are already being used for other
purposes.
New features in HUI
The HUI page has changed considerably and new
functions have been added.
As only channel strips 1-8 are functional in HUI
mode, the keys on channel strips 9-16 have been
mapped to perform specific functions.
• Pressing the SHIFT soft key icon allows you to use
the faders as aux send level controls for the chosen
Bug fixes
In addition to the features listed above, the DM-24
version 2.1 firmware release addresses all known
bugs.
New features in DM-24 version 2.1
page. This can be conve-
send. Pressing this soft key again returns the faders
to fader control of the DAW.
• MUTE keys 11-12 act as left bank and right bank
keys. These banks operate in 8-channel incre-
ments.
• keys 11-12 act as left and right channel
SEL
advance keys. This is similar to the bank keys, but
these keys only "move" by one channel at a time.
• REC key 11 recalls the EDIT screen in Pro Tools,
while key 12 recalls the MIX screen in Pro
REC
Tools.
• 14 and 16 make the waveform shorter
SEL SEL
and longer (time axis) respectively.
• Pressing the 15 key activates ZOOM.
SEL
key and MUTE 15 key make the waveform larger
and smaller respectively.
• key 10 selects the POD controls as pan con-
MUTE
trols.
• key 9 selects SEND A,
REC
SEND B, key 9 selects SEND C,
SEL
selects SEND D, and
MUTE
All of these functions are laid out clearly on the HUI
page as shown here.
TASCAM DM-24 Version 2.1 Release Notes
15
REC
key 10 selects
REC
key 10
SEL
9 selects SEND E.
3