Turning The Power On And Off; Setting The Date And Time; Resetting The Unit - Tascam DR-1 Owner's Manual

2–Preparation

Turning the power on and off

To turn the power ON, press and hold the
on the left side panel until "
on the display.
The Home Screen appears when the unit starts up.

Setting the date and time

Follow these procedures to set the date and time of the
built-in clock. When you create an audio file, date and
time information is included in the file data.
1 Press the key to open the Menu Screen.
MENU
2 Use the wheel to select
key to open the Date/Time Screen.
¥/π

Resetting the unit

The back panel of the unit has a reset hole.
If the unit is operating abnormally, push the end of
a paperclip or similar item into this hole to press a
button inside the unit. This turns the power OFF and
resets the DR-1's system.
6
TASCAM DR-1
key
POWER
" appears
TASCAM DR-1
and press the
DATE/TIME
To turn the power OFF, press and hold the
until "
PORTABLE DIGITAL RECORDER
on the display.
The clock stops while this screen is displayed.
3 Use the keys to move the cursor (the
µ and ≤
part highlighted in inverse) and use the wheel to
set the values.
4 After making the setting, press the
restart the clock from the newly set value.
The display returns to the Menu Screen.
CAUTION
Do not press the reset button when the unit is
functioning properly.
key
POWER
" appears
key to
¥/π