Table of Contents
Advertisement
16–System Settings and Formatting
From the Setup Screen, you can change various
settings to optimize the device for your use
environment and other requirements. You can also
initialize and format the SD card.
To open the Setup Screen, press the
from the Menu Screen and press the
SETUP
The following settings can be made for the items on
the Setup Screen.
Making System Settings
Setting the search speed
Use the
CUE/REV SPEED
forward and backward searching when pressing and
holding the
and
keys.
≤
µ
Options:
,
,
(factory setting),
x2
x4
x8
Turning the unit power OFF automatically
Use the
item to set the time before the
AUTO OFF
unit power automatically turns OFF after the last
activity or use when powered by the internal battery.
Options:
(factory setting—the unit does not
OFF
automatically turn OFF),
30 min
Backlight Auto OFF setting
Use
to set the time until the backlight
BACKLIGHT
automatically turns OFF after the last operation when
powered by the internal battery.
Options:
(backlight always on),
OFF
setting),
,
10 sec
15 sec
Restoring the factory settings
Use the
item to restore the various
INITIALIZE
settings of this unit to their factory settings.
1 Select
and press the
INITIALIZE
highlight "
."
Exec
2 Press the
key again to open a confirmation
¥/π
pop-up window.
3 Press the
key to initialize the unit. Press the
¥/π
key to cancel initialization.
STOP/HOME
key. Select
MENU
key.
¥/π
item to set the speed of
x10
,
,
,
3 min
5 min
10 min
(factory
5 sec
,
30 sec
key to
¥/π
Adjust the display contrast
Use
to adjust the display contrast.
CONTRAST
Options: 1–20 (factory setting: 12)
Adjust the backlight brightness
Use
to adjust the backlight brightness.
DIMMER
Options:
(factory setting),
HIGH
(no backlight)
OFF
,
LOW
35
TASCAM DR-1
Hide quick links:
Advertisement
Table of Contents
