Targus PA070U User Manual page 2

INTRODUCTION
Congratulations on your purchase of the Targus USB Mobile Port
Replicator! It is an intelligent expansion module that easily connects to a
PC or notebook via a USB port.
This user's guide provides descriptions of the Targus USB Mobile Port
Replicator's features, and gives instructions for connecting various devices
and installing the software.
System Requirements
Pentium-class CPU with USB port
One USB V.1.1 compliant port
Operating system: Windows 98 or Windows 2000
Contents
Targus USB Mobile Port Replicator
This user's guide
One 3-foot USB cable (A/B type)
One AC adapter
One software driver diskette
CONNECTING THE USB PORT REPLICATOR
The USB Mobile Port Replicator provides one RS232 serial port, one
parallel port, two PS/2 ports, and two USB ports. This port replicator
provides easy connectivity for serial, PS/2, and other USB devices.
To get started, plug one end of the power adapter into the port replicator
and the other end into the wall outlet. Do not connect any devices at this
time. Once the port replicator is connected and the software installation is
complete, you can connect your devices and install any supporting software
drivers.
Plug the USB connector into the USB port of your computer, and plug the
other end into the USB port of the port replicator.
1