Furrion FSB2N25MC-BL - 2-Zone Soundbar Speaker Quick Start Guide

WHAT'S IN THE BOX

NOTE: Product design and packaging may change without notice.

SETUP

CONNECT YOUR DEVICE

Before installing the unit, temporarily connect the wiring and ensure the soundbar works properly.

SPEAKER AND POWER WIRE SOCKET VIEW

INSTALL YOUR DEVICE

Fix the unit with 8 panhead (#8) self-tapping screws (not provided) according to following diagram.

1. Remove the Net Cover from the main unit.
2. Fix the unit with 8 pieces (#8) pan-head self-tapping screws.
3. Put the Net Cover back on the main unit.

PREPARE THE REMOTE CONTROL

Before use, remove the insulating sheet from the remote control as indicated.

BASIC OPERATION

TURN THE UNIT ON/OFF

When the unit is Off, press POWER button to switch the unit On. When the unit is On, short press POWER button to switch the unit Off.

SELECT FUNCTION MODE

Press MODE button repeatedly to select RADIO, USB (only available when a USB storage is inserted), AUX IN, TV, DVD or BT mode.

ADJUST THE VOLUME

During playback, press VOLUME+ /VOLUME- button to increase/ decrease the volume.

MUTE OR RESUME SOUND

During playback, press MUTE button to silence the unit, press again to resume the sound immediately.

SELECT AND ADJUST THE MODE OF THE SOUND AND MENU

Press SEL button repeatedly to select the mode of VOL, BAS,

TRE(treble), BAL (balance), LOUD OFF/LOUD ON, EQ OFF/FLAT/ ROCK/POP/CLASSIC, RPT OFF/RPT ONE/RPT DIR (in USB mode), RDM OFF/RDM ON (in USB mode), DEVOL, DX/LOCAL (in RADIO mode), STEREO/MONO (in RADIO mode) in the sequence and circulation.

Press VOLUME+ /VOLUME- button to select your desired mode.

NOTE: DEVOL – when armed, it will re-instate the volume control to a default level lower than 60% after the unit is turned on. When disarmed, the volume control setting after powering on the unit will be set to the same level as last used before switching off the unit (even volume maximum).

This function avoids people get shocked when turning on the next day / blasts with very loud sound levels.

SELECT A PRESET EQ MODE

Press EQ button repeatedly on the remote control to select the preset music equalizer curves: EQ OFF, CLASSIC, POP, ROCK, FLAT. The sound effect will be changed accordingly.

SELECT THE SPEAKER ZONE 1/2

Press ZONE1/2 button to turn on or off the audio source in each of speakers. The corresponding icon "ZONE 1 "or "ZONE 2"will be displayed on LCD once it is selected.

RESET THE UNIT

If the display is incorrect, or the function buttons are not effective or the sound is distorted, switch the unit to AUX IN mode, press and hold MODE button for more than 6 seconds to make the unit return to factory default settings and re-instate the correct functions.

For further support and to download the complete user manual please scan the QR code or visit:

https://furrion.com/pages/downloads-audio-visual