IMMAX NEO SMART BRIDGE PRO Manual

Product Description

It is a mini Smart Gateway. It consists of a highly integrated Wi-Fi module, low power-consuming ZigBee module, and PCBA. It can be connected to the Smartlife Smart app for device adding, reset, third-party control, and ZigBee group control, meeting smart home requirements

Technical specifications

Features supporting security logic: Yes
Color: white
Protocol: ZigBee 3.0, Wi-Fi, ; BLE5.0
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: WiFi/BLE: 11dBm
ZigBee: 10dBm - max 11dBm
Source input voltage: AC 230V 50-60Hz
Smart gate input voltage: 5V 1A
Working voltage: 1.8 - 3.3V
Dimensions: 15 x 60 x 60 mm
Weight: 33g

Application installation and commissioning

Step1: Download&Registration

Scan the QC Code to download " Smart Life" APP. Or Search"Smart Life"in Apple store or Google Play to install the APP. Open the " Smart Life" APP, tap "Register"to get an account with your phone number or E-mail.
Sign in the APP.

Step2: Add Decices in Easy Mode ( Recommend )

Make sure your product is powered on
Make sure your mobile phone is connected to your Wi-Fi
Press the power button until the indicator begin to flash quickly (about 2timers/second),this means the device is already for configuration
Open your " Smart Life" APP, tap "+" on the top right of the APP
Select Device Type, tap " confirm indicator rapidly blink". It will fetch the password of the Wi-Fi network your mobile phone connected.
Tap "Confirm" to connect to the device, when it appears " successfully add 1device", then the connection is completed and your devices is listed in your APP list.

Add Devices in AP Mode

(If failed in Easy Mode, user could use AP mode)
Press the power button for more that 5seconds until the indicator begin to flash quickly, then press it for another 5seconds until the indicator flash slowly.
Tap "+" on the top right of the APP,Select Device Type
Tap " AP Mode " on the top right,"confirm indicator slowly blink". It will fetch the password of the Wi-Fi network your mobile phone connected.
Tap "Confirm" and "connect now"to go to the WLAN setting interface in your mobile phone. Select the Wi-Fi network named " Smart Life_xxx" to connect it.
Return to the " Smart Life" APP, the connection will start automatically
When it appears " successfully add 1device", then the connection is completed and your devices is listed in your APP list.

How to reset the device (put it into pairing mode)?

1. Press the reset button for 5 seconds until the LED indicator flashes quickly. The device is switched to basic pairing mode.
2. Press the reset button again for 5 seconds until the LED indicator flashes slowly. The device switches to AP mode.

LED status

Red LED (WiFi)
On - the device is connected to a WiFi network
Flashing - device is connecting to WiFi network
Not lit - WiFi network information is configured but cannot connect
Blue LED (Zigbee/Bluetooth)
Flashing - devices can connect to the smart gateway
On - Zigbee/Bluetooth connection is active
Not lit - Zigbee/Bluetooth connection is not active

www.immax.cz