IMMAX NEO LITE - Smart Christmas LED Lighting-Chain 40m, 400 Diodes, WW+RGB, WiFi, TUYA Manual

INSTALLATION

1. Use the power adapter with DC 24V of output voltage only.
2. Please unfold the LED lightstring to avoid the overheat issues. Please connect the cables of LED lightstring with the right position on the controller. Test the APP to check if it can control the LED lightstring correctly. If everything goes well, go to nest step.
3. Check and ensure the power supply, controller and LED lightstring are connected correctly.

ATTENTIONS

1. Do not put any metal around the controller, which could block WiFi signal.
2. Ensure the power supply and controller are connected correctly.
3. The power supply output voltage should be same as LED lightstring working voltage.
4. Do not cover anything on the surface of power supply, controller and LED lightstring.
5. Ensure the connection is correct before powering.

PRODUCT FUNCTIONS DIAGRAM

DOWNLOAD AND REGISTRATION

Scan the QR Code to download "Immax NEO PRO" APP. Or Search "Immax NEO PRO" in App store or Google Play to install the APP.

Open the "Immax NEO PRO" APP, tap "Register" to get an account with your phone number or E-mail. Sign in the APP.

APP CONNECTION

Preparation: Power on the LED lightstring and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI.
Reset the LED tree - long press the ' L ' button on the controller for more than 10 second. The WiFi LED on the controller will flash red quickly. Find the "+" (in the corresponding room of the APP) to add devices. If your mobile have already turned on blue tooth before connecting the LED lightstring, then no need to turn on blue tooth again, the APP will connect to the LED lightstring automatically. If your mobile doesn't turn on the Bluetooth, the APP will pop up an interface with tips to ask you to turn on bluetooth. Then please choose "Allow", then the bluetooth function of your mobile will be turned on. After that, the APP will pop up tips with info of the LED lightstring, then choose "Go to add". Will go into an interface of Bluetooth device, choose "+" and go into next interface (Enter Wi-Fi password). Input the password of the WIFI and choose "Confirm", then it will go into status of "Connecting......", you will need to await for mobile to pair with the controller at this step. Choose "Done" when it shows "Added successfully", then go into operation modes.

APPLICATION

In Immax NEO PRO you can turn the LED lightstring on and off or control preset programs and the timer.

3 PROGRAMS

You can choose from these 3 preset functions: Steady, Flash, Fade.
You can adjust color temperature and light brightness under each function.

TIMER

With Timer function, you can set the desired lighting schedule.

CONTROLLER

The L indicator light blinks RED in pairing mode
The L indicator light blinks GREEN when connecting to the Internet.
The L indicator light is steady GREEN after connected to the Network.
The L indicator light blinks GREEN when the wireless router has Network error.

Function Button ' L '

• press 1 time to change function
• long press 10 seconds to reset the device

Function Button ' R '

• press 1 time to change color temperature

Safety Information

Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.

Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

• Do not use different brands and types of batteries in the same device
• When replacing the batteries, always replace all the batteries in the device
• Do not use rechargeable or reusable batteries.
• Do not allow children to insert batteries without supervision.
• Follow the battery manufacturer's instructions for proper battery handling and disposal.

The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.

To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.

Do not disassemble the product, electric shock may occur.

Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.

Follow the instructions in the enclosed manual.

Maintenance

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.

Technical specifications

Protocol: Wifi
Frequency: 2400 MHz~2483.5 MHz
Maximum RF output power: Wifi: 20 dBm

Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immax.cz
Designed in Czech Republic, Made in China