Advertisement
5. Connect the single DC output
connector of the power adapter to
the DC IN jack on the adapter.
Then connect the supplied power
cord to the power adapter and the
other end to an AC outlet.
Note: The hard drive connected to the TU2-IDSA must be formatted in FAT-16
or FAT-32 in order for Windows 98SE or Windows ME to recognize it.
Note: For Windows 98SE users, please refer to the question 1 in the
troubleshooting section. For Windows XP/2000/ME users continue on to
step 6.
6. Connect the USB connector into
available USB port on the
computer. Drivers will install
automatically.
7. Double-click the My Computer
icon.
8. The external hard drive(s) should
be displayed. If your hard drive is
brand new, please see question 3
in the troubleshooting section.
4
English
Advertisement
