Advertisement
2. How to Install
Note: It is recommended that you format a brand new hard drive first. Please
refer to question 2 in the troubleshooting section for more information.
Connecting SATA Drive
1. Connect the provided SATA cable
to the SATA receptacle on your
SATA hard drive and the adapter.
2. Using the provided HDD power
cable, connect the mini 4-pin end
to the adapter's DC connector and
the 15-pin SATA female power
connector end to the 15-pin power
connector on the hard drive. Then
continue on to step 5.
Note: If your SATA hard drive comes with a legacy 4-pin power connector, use
the 4-pin power connector instead. To connect to both IDE hard drive and
SATA hard drive with legacy 4-pin power connector, you need a 4-pin Y type
power cable to convert a single 4-pin power connector into a double 4-pin
power connector.
2
English
Advertisement
