Canon imageFORMULA DR-M140II User Manual page 19

• Laminated documents may not be scanned correctly, depending
on the document.
• It is recommended that thin documents be fed one page at a time.
• Scanning the following types of documents can cause a paper jam
or malfunction. To scan such a document, make a photocopy of the
document and then scan the photocopy.
There are creases or
fold lines.
There are curls.
There are tears.
There are clips or
staples.
Business Card
Size: 50 mm x 85 mm (1.97" x 3.35") or larger
(80 lb bond) 0.45 mm (0.0177") or smaller
2
Paper thickness: 380 g/m
Orientation: Vertical feeding only
Eject method: Straight path only
IMPORTANT
If a stack of business cards cannot be fed properly, reduce the
number of cards in the stack.
Card (plastic)
Size: 54 mm x 86 mm (2.12" x 3.37") (ISO standard)
Card thickness: 0.76 mm (0.03") or less, 1.4 mm (0.055") or less
for the embossment
Orientation: Vertical feeding only
Eject method: Straight path only
Loading capacity: 3 cards (non-embossed), 1 card (embossed)
CAUTION
• Use the straight path when scanning cards.
• Embossed cards may not be able to be scanned correctly,
depending on the type of embossment.
Carbon paper
The surface is coated.
Extremely thin document
such as semi-transparent
thin paper.
Documents with excessive
paper dust particles.
19
• When scanning cards, clear the [Detect by Ultrasonic] check box in
the [Error Detection] tab on the scanner driver settings screen.
p. 26)
(See