Craftsman 358.792443 Operator's Manual page 10

KNOW Y OUR
B RUSHCUTTER ATTACHMENT
READ THiS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTI-ER ATTAOHMENT Compare the illustrations with your unit to familiarize
yourself with the location of various controls and adjustments. Save this manual for
future reference.
Hanger j
immer Shield _
B,adeBhied
Heo B'ade Bh% B,ade
BLADE
The BLADE is designed for cutting
grass, weeds, and brush up to 1/2 inch
(1 cm) in diameter.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and is designed for cutting grass and
light weeds.
BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec-
tion from the spinning trimmer head.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach-
ments to be installed. The optional at-
tachments are:
Edger ............... 71-79240
Cultivator ............ 71-79241
Blower .............. 71-79242
Pruner .............. 71-79245
_. WARNING: Always disconnect
powerhead spark plug before remov-
ing or installing attachments.
REMOVING BRUSHCUTTER AT-
TACHMENT (OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or instal-
ling attachments, place the powerhead
and attachment on a flat surface for
stability.
1= Loosen the coupler by turning the
knob counterclockwise.
Coupler
Attachment
Upper Shaft
LOOSEN
TIGHTEiX Knob
Press and hold the locking/release
button.
Locking/Release
Button ""-,.,_ _---._
3,
10
Attachment
While securely holding the upper
shaft, pull the attachment straight
out of the coupler.