Diamond Guitar Pedals MEMORY LANE User Manual page 9

���� �������
���������� ����� ���� �����
FX Loop Send Levels
Some amplifiers have variable or switchable FX loop send and/or receive
levels. On the send side, simply set the amp's send level so as not to cause
any distortion in the delay path even when strumming hard. If send levels are
extremely hot and fixed to one level, there is a small jumper in the Memory
Lane that can be set to an alternate position to pad down the input signal as
it comes into the delay path. This alternate jumper setting is shown in the
picture below:
Line Pad
No Pad
- 9 -