Stereo Operation - Diamond Guitar Pedals MEMORY LANE User Manual

���� �������
����� ���� �����
If you're unsure whether the FX loop is serial or parallel, first try patching for
parallel, and if no direct guitar signal is heard, your amp more than likely has
a serial FX loop. Repatch for serial and you're all set.

Stereo Operation

'Stereo' operation for amps without an FX loop is also simple – simply patch
the mix/direct output from the Memory Lane into the first amp's guitar input,
and patch the delay only output into the second amp's guitar input. With this
setup, signal only goes to the second amp when the delay is turned on. The
Mix control on the Memory Lane will control the level of delayed signal going
to the second amp.
�����
���������� ����� ����
- 7 -