Diamond Guitar Pedals MEMORY LANE User Manual page 8

Serial FX Loop
Stereo operation for amps with a serial FX loop is a touch more involved.
Patch the FX send output of the main amp (likely the one with channel switch-
ing distortion) into the input of the Memory Lane, then patch the mix/direct
output back to that same amp, and the delay only output back to another amp
(probably one with a clean channel or no channel switching). Like the simple
stereo setting above, signal only goes to the second amp when the delay is
turned on. Also, with this setup, any tube distortion from the main amp will
still be routed through the delay path and out to the second amp.
���� �������
���������� ����� ���� �����
Parallel FX Loop
Stereo operation for amps with a parallel FX loop is somewhat reverse to the
serial FX loop stereo setup. Patch the FX send output of the main amp into the
input of the Memory Lane, then patch the delay only output back to that same
amp, and the mix/direct output out to the second amp. This setup is cool as
both amps get direct signal all the time (you're essentially slaving the second
amp from the first), with the first amp also getting the delayed signal when
the Memory Lane is turned on.
- 8 -