Dismantling; Disposal - GCE druva PTLH0FT Instructions For Use Manual

Point of use regulator
Table of Contents

Advertisement

Available languages

Available languages

10.2. DISMANTLING

PRIOR STARTING DISMANTLING
Depressurize the line regulator by turning the handwheel.
Depressurize tubing system and purge with inert gas if neccessary.
Dismantle the assemblies and components properly and in compliance with applicable local work safety and
environmental protection regulations. environmental protection regulations.
At the end devices and components have to be cleaned and disassembled due to valid rules of industrial
safety and environment protection.
WARNING!
Do not open system fi lled or used with toxic and/ or corrosive gases.

10.3. DISPOSAL

In the absence of a return or disposal agreement, the dismantled components should be recycled as follows:
Metals: scrap.
Plastics: recycle.
Other components: sort and dispose.
In accordance to Article 33 of REACH GCE, s.r.o. as responsible manufacturer shall inform all customers
if materials containing 0.1% or more of substances included in the list of Substance of Very High Concern
(SVHC).
The most commonly used brass alloys used for bodies and other brass components contain 2-3% of lead (Pb),
EC no. 231-468-6, CAS no. 7439-92-1. The lead will not be released to the gas or surrounding environment
during normal use. After end of life the product shall be scrapped by an authorized metal recycler to ensure
effi cient material handling with minimal impact to environment and health.
To date we have no information that indicates that other materials containing SVHC of concentrations
exceeding 0.1% are included in any GCE product.
NOTE!
Risk of environmental harm through incorrect disposal!
Incorrect disposal can harm the environment.
Commission a specialized licensed fi rm to dispose of electrical waste, electronic components, lubricants
and other auxiliary materials.
If in doubt, enquire how to ensure environmentally compatible disposal at your local council offi ce or
consult a specialist disposal fi rm.
MANUFACTURER:
GCE, s.r.o.
Zizkova 381
583 01 Chotebor
Czech Republic
Tel : +420 569 661 111
Fax : +420 569 661 602
http://www.gcegroup.com
© GCE s.r.o.
21/44
EN

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ptlheft

Table of Contents