Advertisement
Available languages
Available languages
KNOW
YOUR
BRUSHCUTTER
ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER
ATTACHMENT. Compare
the illustrations with your unit to familiarize
yourself with the location
of various controls and adjustments,
Save this manual for
future reference,
_T_
Hanger
be
Trimmer Shield
_'-_
Blade
Blade Shield
BLADE
The BLADE is designed for cutting
grass, weeds, and brush up to 1/2 inch
m diameter.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and is designed for cutting grass and
light weeds.
BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec-
tion from the spinning trimmer head.
OPERATING THE COUPLER
Your powerhead
is equipped with a
coupler which enables optional attach-
ments to be installed.
The optional at-
tachments are:
Edger ...............
358.792400
Cultivator ............
358.792410
Blower ..............
358.792421
WARNING:
Always disconnect
powerhead
spark plug before remov-
ing or installing attachments.
REMOVING BRUSHCUTTER
AT*
TACHMENT (OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION:
When removing or instal-
ling attachments,
place the powerhead
and attachment on a flat surface for
stability.
1.
Loosen the coupler by turning the
knob counterclockwise.
Upper Tube
Coupler
Lower
\
LOOSEN
Attachment
TIGHTEN
Knob
2.
Press and hold the locking/release
button.
Lower Attachment
UpperTube
3. While securely holding the upper
tube, pull the attachment
straight
out of the coupler.
10
Advertisement
