Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter 6000 Operator's Manual

Hide thumbs Also See for TimeCutter 6000:
Table of Contents

Advertisement

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to
Fuel Safety (page 12)
list of fuel related precautions.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep your hands, feet, face, clothing and
other body parts away the engine, muffler and
other hot surfaces.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours or yearly,
whichever comes first—Check the
in-line fuel filter.
Every 200 hours/Every 2 years (whichever
comes first)—Replace the in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1.
Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Replace the filter
Note:
Note: Ensure that the markings on the
filter follow the fuel flow direction.
for a complete
ARK
(Figure
39).
31
Figure 39
g027939
g033082

Advertisement

Table of Contents
loading

This manual is also suitable for:

7576075760w

Table of Contents