Table of Contents
Advertisement
®
Widgets
Swipe down from the top
of the screen to view the
widgets, then swipe left or
right to view more widgets.
®
Electrical
contacts
Charge using an external
power accessory.
NOTE: Not available on all
models.
NOTE: Go to www.buy.garmin.com to
purchase optional accessories.
Pairing Your Phone
To use the connected features of the
Edge"'
device, it must be paired directly
through the Garmin Connect· app, instead
of from the
Bluetooth' " '
settings on your
phone.
1 From the app store on your phone,
install and open the Garmin Connect
app.
2 Hold
-
to turn on the device.
The first time you turn on the device,
you will select the device language.
The next screen prompts you to pair
with your phone.
3 Follow the instructions in the app
to complete the pairing and setup
process.
-
Quick
Start Manual
After you pair successfully, a message
I
appears, and your device syncs
automatically with your phone.
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the device
is oriented toward the sky. You can
install the bike mount on the stem or the
handlebar.
NOTE: If you do not have this mount, you
can skip this task.
1
Select a secure location to mount the
device where it does not interfere with
the safe operation of your bike.
2 Place the rubber disk
CD
on the back
of the bike mount.
Two rubber disks are included, and
you can select the disk that best fits
your bike. The rubber tabs align with
the back of the bike mount so it stays
in place.
3
Advertisement
Table of Contents
