Table of Contents
Advertisement
8 Press down slightly and close the lever to lock the Edge device into the mount.
9 Connect the power pod cable
Required Cables
In order to complete the installation, you must purchase one of these compatible cables:
• Bosch
power mount accessory cable
®
• Shimano
®
power mount accessory cable
NOTE: Garmin recommends having a bike technician trim the compatible Shimano cable to the correct
length.
Wire Color
Red
Yellow
Blue
Black
• USB-A power mount accessory cable
NOTE: If you have trouble installing and wiring the mount, Garmin recommends visiting a bike service store for
assistance.
Edge Power Mount Status LED
LED Activity
Status
Solid green
The power mount is connected to power, but it is not connected to an Edge device.
Flashing green The power mount is connected to the Edge device and is charging.
An error occurred. Unplug the power mount, and remove the Edge device. Plug the power
Flashing red
mount in again, and install the Edge device. If the red flashing continues, contact Product
Support.
48
to the compatible power cable on your eBike
Wire Function
Power
Power
Ground
Ground
(Required Cables, page
48).
Device Information
Advertisement
Table of Contents
