Table of Contents
Advertisement
AVAILABLE ACCESSORIES
Crevice Tool
A
Clean in corners and other tight spaces or
reach baseboards and ceilings with this slim
crevice tool.
Duster Crevice Tool
B
Two cleaning tools in one. The crevice tool
gives you extended reach to clean in tight
spaces, while the soft brush is ideal for dusting
delicate surfaces.
Upholstery Tool
C
Picks up hair, dust, and large debris from
mattresses, couches, curtains, lampshades,
and other delicate upholstered fabrics.
Pet Multi-Tool
D
A single convertible tool for cleaning tough pet
messes two ways: use the stiff bristle brush to
clean stuck-on debris, or take off the bristles to
reveal an upholstery tool perfect for removing
stubborn pet hair and large piles of debris.
HairPro™ Self-Cleaning Pet Power Brush
E
Tackles pet hair and ground-in dirt from above-
floor areas like carpeted stairs and upholstery,
while actively removing hair wrap as it cleans.
Pet Power Brush
F
The turbine brush loosens and removes pet
hair and debris from carpets, and powerfully
deep-cleans dander out of upholstery and
other surfaces.
Pet Crevice Tool
G
This versatile, slender 8" tool removes pet
hair from hard-to-reach spaces like corners,
ceilings, and between couch cushions.
Under-Appliance Wand
H
Clean under and behind hard-to-move
appliances and furniture with this adjustable
36" tool. Flip the extension piece over to clean
the underside of appliances.
Anti-Allergen Dust Brush
I
This brush features nylon fiber bristles specifically
designed for removing fine dust and allergen
particles from the most delicate surfaces.
Home & Car Detail Kit
J
Deep-clean your car like a professional
detailer, or clean hard-to-reach areas in your
home. Micro-sized tools let you clean around
delicate objects and access the tightest spaces
like car vents and computer keyboards.
Accessory Bag
K
This convenient accessory storage bag
measures 32 cm x 70 cm and fits the Under-
Appliance Wand. Smaller size available at
sharkaccessories.com.
NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap
of the box. To order additional accessories, visit sharkaccessories.com.
s h a r kc l e a n . c o m
A
B
C
D
E
F
G
H
I
J
K
TROUBLESHOOTING
Vacuum is not picking up debris. No suction or light suction.
• Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinserting in the vacuum.
• Dust cup may be full; empty dust cup.
• Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any
blockages found.
(Refer to Checking for Blockages section for more information.)
• If any string, carpet fibers, or hair is wrapped around the brushroll, extend cleaning time to
allow the self-cleaning brushroll to remove it.
– If some hair or fibers remain wrapped around brushroll after continued use, remove the
floor nozzle cover and carefully cut debris with scissors and remove from brushroll. See
Cleaning the Brushroll section for more information.
Vacuum lifts area rugs.
• Make sure Power/Surface switch is set to Hard Floor (setting I).
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
Brushroll does not spin in carpet cleaning mode.
• If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum.
Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum,
and turn on power.
• With the power on, recline the handle, which will automatically turn on the brushroll.
• Ensure that the Power/Surface switch is set to Carpet (setting II) for brushroll to spin.
Vacuum turns off on its own or indicator light flashes red.
This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats,
the thermostat will automatically turn the suction motor off. Perform the following steps
to restart the thermostat:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning and
Replacing the Filters.).
3. Check for blockages in hose, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 45 minutes.
5. Plug in vacuum and turn it on.
Vacuum is emitting air that smells bad.
• Dust cup may be full; empty dust cup. Empty dust cup after each use for optimal
Odor Neutralizer Technology performance.
• Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling them.
• Check to make sure odor cartridge is installed in the dial and the dial is installed in the nozzle.
• Check the odor neutralizer dial on the nozzle to see what setting is enabled.
• If the dial is at any setting from Low to High and the cartridge has been installed for 6
months or longer, consider replacing it.
• If the odor cartridge is still emitting a scent but you dislike it, consider turning the intensity
down, or reinstall the dial in the nozzle without the cartridge.
• If the odor cartridge is not emitting a scent, consider replacing it.
For all other issues, please go to support.sharkclean.com/ or call Customer Service 1-800-798-7398.
s h a r kc l e a n . c o m
Advertisement
Table of Contents
