Shark DuoClean ZU881 Quick Start Manual

MAINTENANCE
Empty dust cup after each use
Release
Empty
Zero-M Technology
The Zero-M Self-Cleaning Brushroll delivers nonstop hair removal. To clear any blockages,
see instructions below.
Cleaning the Brushroll
1. To open the brushroll garage, slide
both release buttons on the floor
nozzle away from you, towards the
back of the nozzle, then lift off the lid.
2. Clear away any objects or debris.
3. To close the brushroll garage, insert the
3 tabs on top of the lid into the 3 slots
in the nozzle, then push down on both
sides of the lid until it clicks securely
into place. If the Brushroll Indicator
Light isn't green and the headlights are
flashing, check again that both sides of
the lid are locked in place.
For questions or to register your product, visit us online at sharkclean.com
©2019 SharkNinja Operating LLC. DUOCLEAN, LIFT-AWAY, POWERED LIFT-AWAY, ZERO-M
and SHARK are registered trademarks of SharkNinja Operating LLC.
ZU881_QSG_REV_Mv3
Filter Maintenance
To keep suction strong, rinse
the filters with water only and
allow them to air-dry completely
before reinstalling them. Tap
loosedirt from filters asneeded
between washes.
See enclosed Owner's Guide for
complete details on removing
and cleaning filters.
Brushroll Maintenance
Carefully remove any
debris that may be
impeding the brushroll.
Cleaning the Soft Roller
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Checking the Nozzle for Blockages
Tilt the neck of the nozzle back to straighten
the airway, then remove any blockages.
@sharkcleaning
Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
POWERED
LIFT-AWAY
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum's great features.
Register your vacuum at
registeryourshark.com
For additional parts
and accessories, visit
sharkaccessories.com
ZU881
®