If a runner, rug, carpet, or cliffs. expose any parts of the robotic vacuum 27. Use ONLY the Shark® charging dock small threshold that is less than 8 inches cleaner to water or other liquids. 18. DO NOT use to pick up:...
Page 3
GETTING TO KNOW YOUR SHARK® AI ROBOT GETTING TO KNOW YOUR SHARK® AI ROBOT Error Indicator Light Charge Indicator Lights Wi-Fi Indicator Light Front Bumper Clean Button Dock Button DOCK FRONT Power Button Charging Contacts DOCK BOTTOM Cliff and Boundary Sensors...
DOCK SETUP CHARGING IMPORTANT: The Shark® AI Robot has a pre-installed rechargeable battery. Charge the battery completely before first use. It may take up to 6 hours to fully charge. 3 ft. 3 ft. 5 ft. • Select a permanent location for the Charging Dock, because every time you relocate it, your robot will have to completely re-map your house.
CHARGE INDICATOR LIGHTS BUTTONS AND INDICATOR LIGHTS CLEAN BUTTON In Use Press to begin a cleaning Full Partial session. Press again to stop. Charge Charge Charge (White) (White) (Red) While Charging (White) No Charge DOCK BUTTON or Off Press to stop cleaning and send robot back to the The white charge indicator lights show how much charging dock.
Page 6
USING THE SHARK® AI ROBOT PREP YOUR HOME Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it IQ NAVIGATION™ AND AI LASER VISION cleans. To prevent the robot from entering areas you don't want it to, set up no-go zones in the app. For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly maintained.
Search for SharkClean in the app store and download the app to your iPhone or Android SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA Visit sharkclean.com/app for setup instructions which include how to enable Shark Skill for Amazon Alexa and using with Google Assistant. Google Assistant: Amazon Alexa: “OK Google, tell Shark to start cleaning.”...
MAINTENANCE MAINTENANCE CLEANING AND REPLACING THE FILTER SELF-CLEANING BRUSHROLL For optimal suction power, after each use, clean and reinsert the filter inside the robot's dust bin. The Self-Cleaning Brushroll actively removes hair wrap while your robot cleans. If some debris remains See sharkaccessories.com for replacement filters.
MAINTENANCE MAINTENANCE CLEANING SENSORS AND CHARGING CONTACTS CLEANING THE WHEELS CLEAN SENSORS AND CHARGING CONTACTS AS NEEDED. With a dry cloth, gently dust off the sensors CLEAN FRONT WHEEL HOUSING PERIODICALLY. and contacts located on the bottom of the robot and on the dock. See sharkaccessories.com for replacement parts.
NOTE: To order replacement parts and filters, visit sharkaccessories.com. CAUTION: Turn off power before performing any maintenance. TROUBLESHOOTING If any error lights are illuminated or flashing on your Shark® AI Robot, see the error code chart below: Washable Filter Robot Dust Bin...
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY 5.6 You will not use the Ayla Application Libraries or Ayla Embedded Software to attempt to gain BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating unauthorized access to or use of the systems/services of SharkNinja’s other licensors;...
REGISTER YOUR PURCHASE registeryourshark.com ONE (1) YEAR LIMITED WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is RECORD THIS INFORMATION not transferable.
Page 13
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner's Guide is designed to help you keep your Shark® AI Robot running at peak performance. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-855-460-5425 sharkclean.com Illustrations may differ from actual product.
Need help?
Do you have a question about the 4403931112860 and is the answer not in the manual?
Questions and answers