Baofeng UV-5G PLUS User Manual page 32

6.9.2 Beep PROMPT (BEEP) - MENU 8
If you enable this function, every time a key is pressed, you will hear a Beep tone.
In standby mode, press
Press key to enter the function. Press the
Press key to confirm and exit to return to stand-by mode.
6.9.3 Voice function (VOICE) - MENU 17
In standby mode, press
Press key to enter the function. Press the
To return to the standby mode press
6.9.4 Language of the MENU (LANGUAGE) - MENU 18
This section shows the language of the MENU (English).
In standby mode press
6.9.5 Working Mode (MDF-A) - MENU 24
The radio has four working modes available:
• Frequency mode (FREQ)
• Channel mode (CH)
• Channel name (NAME)
To shift from one mode to another one:
In Standby mode press
Press key again to confirm your selection.
6.9.6 Roger Beep, end Transmission Tone (ROGER) - MENU 36
Roger Beep can be enabled/disabled:
• OFF: Roger Beep disabled
• ON: Roger Beep tone at the end of transmission
In standby mode, press
Press to enter the function. Press the
+ 8. The screen will display
/ keys to turn ON/OFF the beep function.
+ 17; the screen will display "VOICE".
/ keys to select OFF/ON. Confirm your selection by pressing MENU.
key.
+ 18. The display will show "LANGUAGE".
+ 24; select the desired working mode with the
+ 36; the screen will display "ROGER".
/ keys to select OFF/ON. Confirm your selection by press
"BEEP PROMPT".
/
32
keys.
key.