Control Buttons On The D�Splay - Toshiba TD-P493 Owner's Manual

Control Buttons on the Display
To turn on the Display: Press the
centre of the joystick in, the Display
will turn on.
To turn the Display off: Press the
centre of the joystick in and hold it
down for a few seconds, the Display
will turn into standby mode.
To change source: Press the
centre of the joystick in, the sources
list will appear on the screen. Scroll
through the available sources by
pushing the joystick up or down.
To change volume: Increase the
volume by pushing the joystick right.
Decrease the volume by pushing
the joystick left.
Note: Main menu OSD cannot be displayed via joystick.
Connecting the IR Receiver
Before plugging the Display into the mains supply, connect
the supplied IR receiver to the IR input on the Display. Place
the IR receiver in sight of your own remote control. Simply
operate your remote control whilst pointed at the IR receiver
and it will relay the control signal to your Display.
V+ V-
English - 10 -