Table of Contents
Advertisement
The following summary indicates the data that can be visualized on the Lantern OLED Display.
Display
Sealite
V1.08
Operation Mode
Standby
Flash Code:0F4
0.2
1.3
Range / Intensity
High (100%)
Battery Voltage
12V
Status
OK
Hibernation
Disabled
Last Visit
10 MAR 2019
Test LED
Test Off
8
Info Tab
Description
Displays the manufacture revision number.
Indicates the lantern current operation mode:
Standby - The lantern is configured in a minimum current state;
Always on – The daylight sensor is disabled and lantern set to operate day/night time;
Dusk till Dawn – The daylight sensor is monitored and the lantern will only operate at
night time.
Indicates the lantern current Flash Code.
This information provides Sealite's Flash Code in Hex decimal and the on/off flash
duration. Please refer to the provided list of Flash Codes included in the appendix.
Displays the lantern operating intensity in percentage. The SL-510-SA can provide four
different intensity levels in percentage or with a step size of 3.125% (or 1/32%) nautical
miles when set by range.
•
Low (25%)
•
Medium (50%)
•
Medium High (75%)
•
High (100%)
Indicates the lantern real-time battery voltage level.
Displays the lantern current operating status. This include the information for:
•
Battery health conditions;
•
LED fault
Indicates if the Hibernation Mode is enabled or disabled. In the case of enabled the unit
will indicate the hibernation start and finish dates (day/month).
Indicates the last time the light has been accessed either via touch pad or SealitePro
App.
On first touch test on, or when screen off, the screen will go into Test Mode for 5
seconds.
®
Advertisement
Table of Contents
Troubleshooting
