Problem
Lantern will not activate.
Refer to Sealite website:
Latest products and information available at www.sealite.com
Trouble Shooting
Remedy
• Ensure Lantern is in darkness
• Wait at least 60 seconds for the program to initialise in darkness
• Ensure battery terminals are properly connected
• Ensure battery voltage is above 12 volts
• Check the status of the LED's on the base of the PCB to determine what
type of fault the light is acting (see Lantern Status section of this manual).
Sealite LED Light Warranty
sealite.com
5-9NM Stand-Alone Marine Lantern
SL-510-SA
55