The SL-510-SA lantern settings can be configured via the programming options menu.
Operating Mode:
To change the Operating Mode, press the Operating Mode field and then select one of three available
options:
•
Standby - The lantern is configured in a minimum current state in which the LEDs are always off
and the internal GPS is disabled.
•
Always on – The daylight sensor is disabled, and the lantern operates according to the set flash
character and intensity levels.
•
Dusk till Dawn – The daylight sensor is monitored, and the lantern will only operate at night time.
Once the Operating Mode is selected press "Set / Apply" to confirm the change. As factory default the
lantern is always set to Dusk till Dawn mode.
Latest products and information available at www.sealite.com
Programming Options
5-9NM Stand-Alone Marine Lantern
SL-510-SA
17