Sealitepro ® Password Reset Procedure - Iridium Sealite SL-510-SA Installation & Service Manual

In the event where the password set is unknown the procedure below should be followed:
Step 1 – Disconnect the power supply from the light head:
Disconnect the light head from the power and then reconnect.
Step 2 – Connect to the lantern using the SealitePro
Once the light is re-connected ensure the following procedure is conducted within one minute. Otherwise
the process at step 1 will need to be completed.
(a). Connect to a lantern by pressing "Connect via Bluetooth
(b). Select a lantern displayed on the "Connect via Bluetooth" screen.
Where examples are identified side by side, the left is applicable to Android
image to iOS devices.
14
SealitePro Password Reset Procedure
®
:
®
"
®
devices and the right
®