Base Settings; Changing The Base Ringtones; Activating/Deactivating Music On Hold; Protecting Against Unauthorized Access - Gigaset C595 Operating Instructions Manual

Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 19.04.2010

Base settings

The base settings are performed using a reg-
istered Gigaset C59H handset.

Changing the base ringtones

u
Volume:
You can choose between five levels of
volumes (1–5; e.g. level 3 = Š) and
the "crescendo" ringtone (6; where the
volume increases with each ring =
‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle state:
¢
v
Audio Settings
¢
Ringtones (Base)
¤
Change multiple line input:
r
s
r
§Save§
•
Activating/deactivating
music on hold
¢
v
Audio Settings
¢
Music on Hold
§Change§
Press
music on hold (³ = on).
•
Protecting against
unauthorized access
Protect the system settings of the base with
a PIN known only to yourself. You must enter
the system PIN when, for example, you regis-
ter/deregister a handset to/from the base or
when you restore the default settings.
Set volume.
Scroll to the next line.
Set melody.
Press the display key to save the
setting.
to activate or deactivate the
Changing the system PIN
You can change the 4-digit system PIN set on
the base (the default is: 0000) to a 4-digit PIN
known only by you.
Gigaset C595 only: Setting a system PIN facil-
itates remote operation of the answering
¢
machine page 39.
Ï
¢ ¢ ¢
v
System
~
Enter the current system PIN
§OK§
and press
~
Enter your new system PIN and
§OK§
press .
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code 0000:
u
Disconnect the power cord from the
base.
u
Hold down the registration/paging but-
ton on the base while reconnecting the
power cable to the base.
u
Keep the key pressed for at least 5
seconds.
The base has now been reset and the system
PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered. All settings are restored
to the factory settings.
•
Restoring the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered.
u
Eco Mode is switched on.
u
The system PIN is not reset.
Ï
¢ ¢ ¢
v
System
~
At the prompt, enter the system
PIN and press
§Yes§
Press the display key.
Base settings
System PIN
.
Base Reset
§OK§
.
51