Table of Contents
Advertisement
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / answering_m.fm / 19.04.2010
Operating the answering
machine on the
Gigaset C595 base
The answering machine is operated via the
handset, the keys on the base (
by remote operation (from another tele-
phone/mobile phone). You can record your
own announcement message or advisory
message via the handset.
Answering machine mode
You can use the answering machine in three
different modes.
u
In Answer & Record mode, the caller
hears the announcement and can then
leave a message.
u
In Answer only mode, the caller hears
your announcement but cannot leave a
message.
u
In Alternating mode you can activate the
answer and record mode for a set period,
outside this period the caller will hear the
advisory message.
Operation via the handset
The handset speaker activates automati-
cally if you receive an audible prompt or
message while operating the answering
machine. You can turn it off with the speaker
key d.
Activating/deactivating and
setting the answering machine
mode
You can choose between Answer & Record,
Answer only and Alternating.
¢
v
Ì
§Edit§
¤
Change multiple line input:
Activation:
Select On or Off to activate/deactivate
the answering machine.
Operating the answering machine on the Gigaset C595 base
¢
page 3) or
¢
Activation (μ= on)
Press the display key.
Mode:
Answer & Record, Answer only or
select Alternating.
If the Alternating mode is selected:
Record from:
Enter hours/minutes for the start of the
period in 4-digit format.
(The time must be set on the phone
beforehand.)
Record until:
Enter hours/minutes for the end of the
period in 4-digit format.
§Save§
Press the display key.
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been set
an appropriate announcement is made (Set
¢
Ã
time
page 15). The
the display. The LED display lights up on the
¢
base (
page 3).
The phone is supplied with pre-recorded
announcements for answer and record
mode and for advisory only mode. If a
personal announcement has not been
recorded, the relevant pre-recorded
announcement is used.
If the messages memory is full and
Activation:
On is selected, saving
is interrupted and you will receive an
instruction to delete old messages.
•
Recording a personal
announcement/advisory message
¢
¢
v
Ì
Announcements
¢
Rec. Announcement / Rec. Advisory
Msg.
§OK§
Press the display key to start the
recording.
You hear the ready tone (short tone).
¤
Now say your announcement (at least 3
seconds).
§End§
Press the display key to end the
recording.
Cancel recording with a or
§OK§
the recording with
.
icon appears in
§Back§
. Restart
35
Advertisement
Table of Contents
