Table of Contents
Advertisement
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 19.04.2010
•
Activating/deactivating
listening in
Ï
¢
v
§Change§
Press
tion (³ = on).
Internal listening in
The line is engaged with an external call, the
handset screen displays information to that
effect. To listen to the external call.
c
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Conference message
and it is not possible to dial another number
from this handset.
Ending listening in
a
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "lis-
tened in" remains connected to the external
participant.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are assigned
automatically on registration. You can
change these names. The name must be no
more than 10 characters. The changed name
displays in every handset list.
u
s
§Options§
Rename
~
§Save§
¢
¢
Telephony
Listening In
to activate/deactivate the func-
Press and hold the talk key .
Press the end call key.
Open the list of handsets. Your
own handset is indicated by
Select the handset.
Open menu.
Enter the new name.
Press the display key.
Using a handset as a room monitor
Changing a handset's
internal number
A handset is automatically assigned the
lowest free number when it is registered. If
all six slots are occupied, if the assigned to
slot 6 is in idle mode, the new entry over-
writes the existing handset definition. You
can change the internal number of all regis-
tered handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by
§Options§
Open menu.
Assign Handset No.
Select and press
r
Select number. Only numbers
that have not been assigned dis-
play.
§Save§
Press the display key to save the
input.
Using a handset as a
room monitor
If the room monitor is activated, a previously
saved destination number is called as soon
as a set noise level is reached. You can save
an internal or external number in your hand-
set as the destination number. All of the
handset keys are deactivated, with the
exception of the display keys and control
key.
The room monitor call to an external
number is terminated after approximately
90 seconds. If the internal handset does not
f
.
answer the room monitor call, the ringing
stops after about 3 minutes. When the room
monitor is activated, all keys are locked
except the end call key. The handset's
speaker is muted.
When the room monitor is activated, incom-
ing calls to the handset are indicated with-
out a ringtone and only display on the
screen. The display and keypad are not illu-
minated and advisory tones are also turned
off.
f
.
§OK§
.
45
Advertisement
Table of Contents
