NETWORKSETUP
Technicalrequirements
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
WirelessWPSnetworkconnection
throughbypressingabutton
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3
Select the menu item »Network« with »
<
»
« and press »
– » Network« menu is active.
4
Select the line »Change Connection Type«
with »
« or »
V
Λ
confirm.
5
Select the option »Wireless WPS« with »
or »
« and press »OK« to confirm.
Λ
– W iFi warning message will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7
Select the line »WPS Type« with »
»
« and select the option »Push Button«
Λ
<
>
with »
« or »
«.
Settings > Network
Picture
Sound
Source
Çhange Connection Type
WiFi
WPS Type
Select Access Point
Network Configuration
Wake-on-LAN
Connect
Test Connection
Change Area
8
With »
« (red) select »Connect« to establish
modem connection.
– » Push the WPS button on your Access
Point« message is displayed.
9
Press the WPS button on the router.
88
ENGLISH
- ------------------------------------------------------------------------------------------
«, »
V
« to confirm.
V
« and press »OK« to
<
>
« or »
« or
V
Tuesday
xx xxx xxxx
TV
Network
Timer
Parental
Wireless WPS
On
Push Button
N/A
Auto
Off
Input Mode
Back
BACK
10
To continue after pressing the WPS button
on the access point, select the option »Con-
tinue« with »
confirm.
– T he "Connection to Gateway: Success"
message will be displayed.
11
Press »
network connection is established with the
current settings.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
«,
Λ
12
Press »EXIT« to end the setting.
>
« or
WirelessWPSnetworkconnectionwith
PIN
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
»
« or »
3
Select the menu item »Network« with »
«
V
<
»
« and press »
– » Network« menu is active.
4
Select the line »Change Connection Type«
with »
V
« and
confirm.
5
Select the option »Wireless WPS« with »
>
or »
« and press »OK« to confirm.
– W iFi warning screen will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7
Select the line »WPS Type« with »
»
« and select the option »PIN« with »
Λ
>
or »
«.
Settings > Network
Exit
EXIT
Picture
Çhange Connection Type
WiFi
WPS Type
Select Access Point
Network Configuration
Wake-on-LAN
Change Area
Change Mode
<
>
« or »
«and press »OK« to
« (green) to make sure that the
>
« and press »OK« to confirm.
« to confirm.
V
« or »
« and press »OK« to
Λ
<
Sound
Source
TV
Network
Timer
«, »
«,
V
Λ
>
« or
<
«
>
« or »
« and
« or
V
<
«
Tuesday
xx xxx xxxx
Parental
Wireless WPS
On
PIN
N/A
Auto
Off
Back
Exit
BACK
EXIT