Sitecom WLR-9000 User Manual page 32

ACL
This wireless router supports MAC Address Control, which prevents unauthorized clients from
accessing your wireless network.
•
Enable wireless access control: Enables the wireless access control function
•
Adding an address into the list: Enter the "MAC Address" and "Comment" of the
wireless station to be added and then click "Add". The wireless station will now be
added into the "Current Access Control List" below. If you are having any difficulties
filling in the fields, just click "Clear" and both "MAC Address" and "Comment" fields
will be cleared.
•
Remove an address from the list: If you want to remove a MAC address from the
"Current Access Control List ", select the MAC address that you want to remove in
the list and then click "Delete Selected". If you want to remove all the MAC addresses
from the list, just click the "Delete All" button. Click "Reset" will clear your current
selections.
Click Apply at the bottom of the screen to save the above configurations. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.