Sitecom WLR-9000 User Manual page 26

•
Band: Allows you to set the AP fixed at 802.11b or 802.11g mode. You can also select
B+G mode to allow 802.11b and 802.11g clients at the same time. For the 5GHz
mode you can set 802.11a, 802.11n, 802.11a/n or 802.11ac mode.
•
Guest Network: Enable this to activate the Guest Network. Devices connected to the
Guest network will have Internet connection but no access to the main network and
cannot communicate with each other
•
SSID: This is the name of the wireless signal which is broadcasted. All the devices in
the same wireless LAN should have the same SSID.
•
Channel: The channel used by the wireless LAN. All devices in the same wireless LAN
should use the same channel.