Installing Spotify; Adjusting The Brightness Of The Display - Grundig Cosmopolit 4 WEB DAB+ Manual

SETTINGS
Automatic­station­search
1 Press and hold » « or » « or press the Jog-
Shuttle. When you release the button, the auto-
matic search stops at the next station.
– I f RDS information is transmitted by the
broadcaster, then the device saves the sta-
tion name. If station and title information is
transmitted, it will appear as ticker text after
a short time.
Tuning­stations­manually
1 Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.
Saving­FM­radio­stations­on­presets
You can use the remote control to fill 10 presets
with the FM radio stations of your choice. If you
assign the presets again, the previously saved
stations are overwritten.
1 Search for the FM station as described.
2 To save stations, keep pressing the number but-
ton »1...0« until »Preset stored« appears in the
display.
– The stored station with a preset number then
appears in the display.
Note:
Button »0« is used for preset 10.
T
3 To store more stations, repeat steps 1 and 2 as
many times as necessary.
­ - --------------------------------------------------------------------------------------------------------------------------------------
Installing­Spotify
If you wish to play back the wide selection of
music available from "Spotify", you need to load
the application onto your mobile phone or tablet
PC, install it and purchase the premium version.
The mobile phone/tablet PC must be registered
in the same WLAN network as your Cosmopolit 4.
1­Download
the­ "Spotify" application to your
mobile phone/tablet PC and install it.
2­Set up and account.
3­Select premium version.
Note:
The premium version of "Spotify" is a fee-
T
charging service.
Adjusting­the­brightness­of­the­
display
1 Press »
« repeatedly on the remote control
to change the brightness of the display in three
levels (bright, medium, dim).
Note:
Minimum power consumption in standby
T
mode is only achieved if in the menu option
»Timeout« a time is set.
By­using­the­menu­
1 In the »System Settings« menu, select the
»Backlight« option with » « or » « on the
remote control or by turning the jog shuttle and
confirm with »OK«.
Time/Date
Backlight
Timeout
Power-on Level
>
>
21­
ENGLISH