Setting The Wlan Region - Grundig Cosmopolit 4 WEB DAB+ Manual

SPECIAL­SETTINGS
encrypted), and the cursor is positioned at
the first input field.
Note:
If the network is encrypted, the network key
T
(security code WEP or WPA) must be en-
tered.
6 Enter network key:
Enter the first character by pressing » «, » «,
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
Repeat entry for the remaining characters.
When the network key has been entered com-
pletely, select the push button »OK« by press-
ing » «, » «, » « or » « and confirm by
pressing »OK«.
– The »Internet Setup« menu appears, the reg-
istration on the network is processed.
Notes:
Numbers, capital and lower case letters as
T
well as special characters are available for
input.
Scroll through the menu pages by pressing
T
» « or » « in order to select other char-
acters.
If you make a mistake during entry, press
T
» «, » «, » « or » « to select the push but-
ton »BKSP« and confirm by pressing »OK«.
The last character is deleted.
If you wish to exit the menu prematurely,
T
press » «, » «, » « or » « to select the
push button »CANCEL« and confirm by
pressing »OK«. The device switches back
one menu level.
– After successful registration, the message
»Setup wizard completed« appears.
7 End the setting by pressing »OK«.
44­
ENGLISH
­-----------------------------------------------------------------------------------------------------
Setting­the­WLAN­region­
You must set the WLAN region in accordance
with the location of the device.
1 Press »MENU« to open the menu.
2 Select the option »System settings« by pressing
» « or » « or by turning the Jog-Shuttle and
open using »OK«.
3 Select the option »Network« by pressing » «
or » « or by turning the Jog-Shuttle and open
using »OK«.
4 Select the option »Wlan region« by pressing
» « or » « or by turning the Jog-Shuttle and
open using »OK«.
5 Select the appropriate WLAN region by press-
ing » « or » « or by turning the Jog-Shuttle
and confirm by pressing »OK«.
Deleting­servers­which­cannot­
be­accessed­
This function allows you to delete servers for
which access data is still stored in the device, al-
though they are no longer available.
1 Select the input source »Music player« by
pressing »M« on the remote control or by
pressing »MODE« on the device.
2 Select the option »Prune servers« by pressing
» « or » « or by turning the Jog-Shuttle on
the device, and confirm by pressing »OK«.
3 Select the push button »YES« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
Note:
If the push button »NO« is selected and
T
confirmed, then the deletion process will be
cancelled.
Time/Date
Internet Setup
Internet Wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
>