Table of Contents
Advertisement
2.6 E xpansion Card Installation
Step 1: Power down the system, unplug the power cord and ensure the system is off.
Step 2: Have the PCI Express card you wish to install ready, with the rear bracket
attached.
Step 3: Remove the bottom panel from the system. Note: there are ten (10) retaining
screws. Set the screws in a safe place while working on the system. Remove the two
side cover screws (see figure 2)
Step 4: Insert the PCI Express card into the PCI Express slot, pressing in until secure.
Secure the rear bracket with two screws (see figure 1).
Step 5: Attach the two side cover screws (see figure 2).
Chapter 2 – Hardware Information
52
Advertisement
Table of Contents
