Table of Contents
Advertisement
4
Attaching the Monitor Brackets to the TV
1. Lay the TV face down. Check the back of the TV to
find the appropriate mounting pattern.
2. Select the appropriate bolts (F/G/H/I/J/K) that fit the
thread holes at the back of the TV (refer to the TVs
manual to determine the correct bolt sizes). Due to
the many varieties of TVs, you may need to visit your
local hardware supplier to find the correct bolt and
washer sizes.
3. Position the left and right bracket over the thread
holes, ensuring the hooks of the bracket (with the
square holes in either side) are towards the top of
the TV (see illustration on the right).
4. Insert the correct bolts through the flat washers (C),
as illustrated on the right. Use the plastic spacers (D)
if necessary (check the TV's back panel).
5. Tighten the bolts and ensure the brackets are firmly
bolted into place.
6. When affixing the monitor brackets, make sure that
the sides of the brackets with the hooks are towards
the top of the display. Use the holes in the centre,
ensuring that the mounting holes are at the same
level.
12 | INSTALLATION
TV
[D]
[C] [F-K]
Advertisement
Table of Contents
