Hold the wall plate to the wall and align the holes in the
plate to the holes drilled into the wall.
Screw the wall plate to the wall with the self-tapping
screws (A), inserting them through the washers (E).
Make sure the upper and lower raised sections of the
plate sit away from the wall.
2B
Drilling the Holes
Attaching to the Wall
[E]
[A]
On the marked holes, drill small diameter pilot holes
into the wood stud wall.
WARNING: Please pay attention to the electrical
lines and also the location of gas and water
lines when drilling holes.
3B
INSTALLATION | 11