Attaching The Wall Mount To The Tv - Bauhn ACTVB-0721 Installation Manual

4

Attaching the Wall Mount to the TV

1. Lay the TV face down. Check the back of the TV to
find the appropriate mounting pattern.
2. Select the appropriate bolts (A-F) that fit the thread
holes at the back of the TV (refer to the TVs manual
to determine the correct bolt sizes). Due to the
many varieties of TVs, you may need to visit your
local hardware supplier to find the correct bolt and
washer sizes.
3. To attach the left and right brackets to the back of
the TV, place the mounting arms on the back of the
TV and align to match the VESA mounting holes.
4. Insert the correct bolts through the flat washers (I),
as illustrated on the right. Use the plastic spacers
(K) if necessary; use one or two plastic spacers for
each thread hole, depending on the bolt used. After
tightening the bolts, it is recommended to have at
least a 5mm screw thread inserted into the hex nut
of the TV.
5. Tighten the bolts and ensure the brackets are firmly
bolted into place.
6. When affixing the brackets, make sure that the sides
of the brackets with the hooks are towards the top
of the display. Use the holes in the centre, ensuring
that the mounting holes are at the same level.
16 | INSTALLATION
TV
[K]
[I]
[A-F]