Table of Contents
Advertisement
Quick Links
The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
User Manual
S55CG97*
Advertisement
Table of Contents
Related Manuals for Samsung S55CG97 Series
Summary of Contents for Samsung S55CG97 Series
- Page 1 You will be informed of the administration fee amount before a technician visits. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
-
Page 2: Table Of Contents
Contents Before Using the Product Precautions and Notes Safety Precautions Read After Installing the product Electricity and Safety Picture sizes and input signals Installation Read Before Connecting a Computer (Supported Resolutions) Operation VESA DMT Cleaning VESA CVT Correct posture to use the product Supported Resolutions for Video Signals CTA-861 Preparations... -
Page 3: Before Using The Product
Before Using the Product Safety Precautions Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). -
Page 4: Installation
Caution Do not disconnect the power cord while the product is being used. ● Only use the power cord provided with your product by Samsung. Do not use the power cord with other ● products. Keep the power socket where the power cord is connected unobstructed. -
Page 5: Operation
Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place. –... - Page 6 Be sure to power off the product and disconnect the power cord when water or other foreign substances – have entered the product. Then contact Samsung Customer Service Centre. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
-
Page 7: Cleaning
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. " Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects. -
Page 8: Correct Posture To Use The Product
Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. ● The optimal viewing distance is over 80 cm. ● Keep your eyes directly in front of the screen. ● Adjust the angle so light does not reflect on the screen. ●... -
Page 9: Preparations
Preparations Installation Attaching the Stand " Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. " Disassembly is the reverse order of assembly. Push the stand neck into Turn the stand neck 90 Tightly fasten the Turn the stand neck 180... -
Page 10: Precautions For Moving The Product
Precautions for moving the product Move the product by holding the stand bottom Do not directly apply pressure on the screen. ● ● with one hand and the stand neck with the other. Do not hold the screen when moving the product. ●... -
Page 11: Checking The Space Around The Product
Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. - Page 12 Caution Grasp the left and right sides of the monitor and adjust the swivel. ● Grasp the centre of the monitor and adjust the height. ● Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get hurt. ●...
-
Page 13: Rotating The Product
Rotating the Product " The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -90˚(±2.0˚) ~ 90˚(±2.0˚) You can rotate your product as shown below. - 13 -... - Page 14 Be sure to fully extend the stand before rotating the product. ● If the stand is not fully extended, the product may not be rotated due to the lock. If you rotate the product by ● force, the lock may become damaged. When rotating the product, be careful not to damage the product by hitting the object or stand.
-
Page 15: Attaching The Bracket Wall
Attaching the BRACKET WALL " The bracket may not be supplied, depending on the country and region. " Power the product off and remove the power cable from the power socket. Attach the BRACKET WALL here BRACKET WALL Align with on the monitor, and tightly fasten the screws on Bracket Wall Sub Remove the screws attached on... - Page 16 Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit ●...
-
Page 17: Control Panel
Control Panel " You can turn on the product with the Power button at the rear of the product, and then use the Control menu. The Control menu appears when the Power button is pressed while the product is On. <Rear>... - Page 18 The colour and shape of parts may differ from what is shown. ● When using the buttons (excluding Power) on the Samsung Smart Remote, the receiver LED does not blink. ● - 18 -...
-
Page 19: Connections
Connections Using various connectors, you can also connect external devices. Read below before connecting the product. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. Before connecting the product, make sure you remove the power cables from both the product and the external device to prevent damage to the product due to a short circuit or over current. - Page 20 Port Description Connect to an audio output device such as headphones or earphones. Connects to a USB camera. " This port does not support media content playback. " To play media content, use the USB port on the One Connect box. Connects to a USB device.
-
Page 21: Connecting The Product To A Pc As A Usb Hub
To switch the mouse, connected to the product, between multiple PCs connected to the product, ensure the ESB (Easy Setting Box) software is installed on the PCs. Details on how to install and use ESB can be found at www.samsung.com. -
Page 22: Tidying Up The Connected Cables
Tidying Up the Connected Cables Raise the stand neck to its full height, and then rotate the Attach the cable guides to the groove on the back of monitor clockwise to switch it to landscape mode. the monitor. Connect the cables to the corresponding ports. Insert the cable holder into the hole to fix the cables. -
Page 23: Precautions And Notes
Precautions and Notes You can get instructions and information that you must read after installation. Read After Installing the product Read this information after installing the product. Picture sizes and input signals Picture Size is applied to the current source. The applied Picture Size will remain in effect whenever you select that source unless you change them. -
Page 24: Read Before Connecting A Computer (Supported Resolutions)
Read Before Connecting a Computer (Supported Resolutions) Check the resolutions supported for PC input signals. When you connect your product to a computer, set the computer's video card to one of the standard resolutions listed in the tables below or on the next pages. The product will automatically adjust to the resolution you choose. Note that the optimal and recommended resolutions are 3840 x 2160 at 165 Hz. -
Page 25: Vesa Cvt
VESA CVT Horizontal Resolution Vertical frequency Clock frequency Polarity frequency HDMI IN (Dots x lines) (Hz) (MHz) (horizontal / vertical) (KHz) 2560 x 1440 88.787 59.951 241.500 1920 x 1080 192.788 164.917 401.000 2560 x 1440 182.996 119.998 497.750 2560 x 1440 257.169 164.958 699.500... -
Page 26: Supported Resolutions For Video Signals
Supported Resolutions for Video Signals Check the resolutions supported for video signals. CTA-861 Horizontal Resolution Vertical frequency Clock frequency Polarity frequency HDMI IN (Dots x lines) (Hz) (MHz) (horizontal / vertical) (KHz) 720 x 480 31.469 59.940 27.000 1280 x 720 45.000 60.000 74.250... -
Page 27: Specifications
Specifications General Model Name S55CG97* Size 55 Class (54.6 Inches / 138.7 cm) Display area 1209.6 mm (H) x 680.4 mm (V) Pixel Pitch 0.315 mm (H) x 0.315 mm (V) Maximum Pixel Frequency 74.267985 MHz Horizontal 115.488 ~ 397.155 Khz Frequency Synchronization (PANEL Spec) - Page 28 Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The specifications are subject to change without notice to improve quality. ● For detailed device specifications, visit the Samsung website. ● (Europe only) ●...
-
Page 29: Appendix
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician is requested to give instructions on how to use product or simply adjusts options without ●... -
Page 30: A Product Damage Caused By Customer's Fault
External impact or drop. ● Use of supplies or separately sold product unspecified by Samsung. ● Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics ● Co., Ltd. Remodeling or repairing the product by customer. -
Page 31: Freesync (For Amd Graphics Card)
The sound quality of the monitor may be degraded. ● " If you encounter any issues when using the function, contact the Samsung Service Centre. " If you change the screen resolution while the function is On, the screen may intermittently blank out due to the graphic card. -
Page 32: The Models In The Graphics Cards List Supports Freesync
The models in the Graphics Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. "...