JVC HR-S7500U Instructions Manual page 59

POWER MENU
C.RESET
Downloaded from: https://www.usersmanualguide.com/
A.D U B
1 2 3
2
4 5 6
7 8 9
0
4
1
EN GAGE IN SERT EDITIN G
Press IN SERT .
6
● Your VCR enters the Insert-Pause mode. (
● The TV screen changes from the still picture to the
– +
input source you are going to record.
JOG ST ART EDITIN G
SHUTTLE
Load the source cassette and play back the segment
7
that is to be inserted. When you reach the start of the
section of the source tape that you wish to insert, press
PLAY to start the tape in your VCR; Insert Editing begins
at this point.
●
EN D IN SERT EDITIN G
At counter "0:00:00", Insert Editing will stop automati-
8
cally and both tapes will continue running in the Play
mode. If you wish to stop Insert Editing before the
specified edit-out point, press C.RESET .
FO R AV IN SERT EDITIN G
If you want to replace the picture, Hi-Fi audio soundtrack and
normal audio soundtrack all at the same time...
In step 6 above, after you press IN SERT , press A.D U B also.
( and
N O TES:
● Insert editing is not possible with cassettes whose safety tab
has been removed.
● In insert editing, the recording speed (SP/EP) is determined by
the previous recording to be replaced. If the previous
recording's speed changes within a single edit, the inserted
picture will be distorted at the switching point.
● A small portion of the recording which precedes an insert edit
may become erased.
light up on the front display panel.)
and are displayed on the front display panel.
blink and lights up on the display panel.)
59
EN
, and