Advertisement
Installation
Mounting 5/5
Install the components of the cable
gland assembly around the
ethernet cable.
1
Insert the assembled cable gland
into the threaded cable gland hole.
Use the provided wrench to tighten
the cable gland nut for water
sealing.
Make sure to tighten the nut as
tight as possible, using the
provided wrench. Note that some
threads will still be exposed after
tightening.
Provided offset wrench
9
2
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
3
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
