Advertisement
Installation
Mounting 2/5
If you are mounting a unit directly
to a surface, attach the mounting
template to the position you
prefer.
Drill screw holes and a cable
routing hole.
Pass the ethernet cable through
the cable routing hole and center
opening on the mount plate.
Secure the mount plate to the
mounting surface with the
included screws and wall
anchors, if necessary.
6
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
