Advertisement
Installation
Mounting 1/5
To remove the dome cover,
loosen all 8 T10 torx security
screws on the top housing
Turn slightly counter-clockwise
and lift to remove the dome
cover.
To remove the camera body
from the mount plate, press
the release button.
While pressing the button, turn
the camera body
counter-clockwise, and then
lift it off the mount plate.
5
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
