Advertisement
INSTALLATION
18
3
Fit the panel on the unit by inserting hooks as
shown in the picture.
4
Insert 2 screws on diagonal corners of panel.
Do not tighten the bolts completely. (The fixing
screws are included in the indoor unit box.)
Check the alignment of panel with the ceiling.
Height can be adjusted using hanging bolts as
shown in the picture. Insert the other 2 screws
and tighten all screws completely.
5
Fit the corner covers.
6
Open 2 screws of control panel cover.
7
Connect 1 display connector and 2 vane control
connectors of front panel to indoor unit PCB.
The position marking on PCB is as:
• Display connector: CN-DISPLAY
• Vane control connector: CN-VANE 1, 2
Advertisement
