Care And Storage - EUROLAMP HW-26MC01 Instructions Manual

Mist fan industrial
Hide thumbs Also See for HW-26MC01:
Table of Contents

Advertisement

Available languages

Available languages

ENG
wet hands.
10. A, 3-prong grounded extension cord must be used with the mist fan, this plug is in-
tended to fit fully in a grounded outlet only, if the plug does not fit correctly into the outlet,
contact a qualified electrician, don't attempt to defeat or disable this safety feature.
11. Make sure the system voltage and frequency are same as local electrical outlet voltage
and frequency.

CARE AND STORAGE

1. Ensure the plug is removed from the electrical outlet before attempting any cleaning or
maintenance.
2. Clean the water tank regularly.
3. Only use soft moistened cloth to clean the mist fan, don't immerse the mist fan in water.
4. For storage: clean mist fan carefully as instructed and cover with plastic cloth, store the
mist fan in clean dry place.
5. Caution: If you find a problem with the fan, please don't open the fan motor housing as
this may cause injury, damage to the fan will void your warranty.
SPECIFICATION OF MIST FAN
Fan diameter: 660mm
Fan tilt adjustable: 300
Temperatures drop: 80C
Operation humidity: 10%-85%
Water tank capacity: 49lt
Place mist fan on the level surface carefully. Make sure the pump inlet is opened.
Fill tank with clean water, minimum level should cover the water pump. Don't operate mist
fan without enough water. Adjust misting volume to the required position and fan speed
Ensure the fan is operating properly. Switch on misting switch, ensure all components are
operating properly. Adjust misting volume as needed, ensure the return water may return
to tank.
Fan oscillation adjustable: 900
Available area: 35m2
Operation temperature: 100C-600C
Working voltage: 220V-240V
Continuance water supply: 8-9 hours
-10-

Advertisement

Table of Contents
loading

This manual is also suitable for:

147-29606

Table of Contents